There’s a moment every surfer knows too well. You’re walking the beach after a dawn session, board under your arm, salt drying on your skin, when your eyes catch that telltale white splotch near the rail. Or maybe you hear the dreaded hollow thock when you drop your stick on the driveway. A ding. Not the end of the world, but for a moment, it feels like a crack in your soul. Then you remember: you’ve got a repair kit, a little bag of resin, cloth, sandpaper, and patience. And suddenly, you’re not just a wave rider. You’re a healer, a craftsman, a ding doctor.
Fixing a ding isn’t just about keeping water out of the foam and your board from turning into a soggy sponge. It’s a rite of passage. The first time you patch up a rail crack or fill a pressure dent, you learn something about your board and about yourself. That board you’ve been charging pits on, that sled that’s carried you through glassy mornings and messy closeouts—it deserves more than a shrug and a trip to the shop. It deserves your hands. The good news? Modern repair kits have made this process so dialed that even a kook can pull off a solid patch with a little guidance.
Let’s break down the essential gear. Your repair kit should be your trusty sidekick, always in the car or the garage. Most kits come with a two-part epoxy or polyester resin, a small tube of hardener, some fiberglass cloth, a mixing cup, a stir stick, and a few sheets of sandpaper in different grits, like 80, 120, and 220. Add a razor blade or a small knife, a piece of cardboard or plastic for a backing, and maybe some duct tape for when things get gnarly. The premium kits toss in a little bottle of UV-activated resin, which is pure magic for quick fixes because it cures in direct sunlight in just a few minutes. That stuff is a game changer for beachside repairs, though you still need to keep it out of direct light until you’re ready.
Now, the process. First, clean the ding out. Get any loose foam, dirt, or wax out of the hole. A ding that’s been sitting is like an open wound—you wouldn’t slap a bandage on without cleaning it first. Use the razor blade to trim away any cracked fiberglass. If the ding is through the glass, you want to bevel the edges a bit so the new layer has something to grip. This is called feathering, and it’s the secret to a patch that doesn’t telegraph through your future rides. Then dry it thoroughly. Water is the enemy. If there’s moisture trapped, your repair will never hold. Some folks use a heat gun or just let the board sit in the sun for an hour. Patience, young grasshopper.
Next, mix your resin. Follow the instructions on your kit—usually a dab of hardener for a squirt of resin, and mix it like you mean it. Scrape the sides of the cup, get a consistent color. If it’s too hot, you mixed too much or it’s super warm outside, so work fast. If it’s too thick, add a bit more resin. For a structural ding, cut a piece of fiberglass cloth a little larger than the hole and wet it out with the resin. Lay it over the area, then use the cardboard or plastic to press it down and squeeze out air bubbles. This is the laminating step. Think of it as giving your board a tiny blanket.
After that hot coat cures, which is usually an hour or so, you’ll start sanding. This is where the zen kicks in. Sanding a cured patch is meditative. Start with the coarse grit to knock down the high spots, then move to the finer grits to blend it into the surrounding glass. The goal isn’t a perfect mirror finish—it’s a smooth, watertight surface that feels like part of the board. Ride it and you’ll barely notice the scar. And that’s the beauty. Every ding tells a story. The bottom crack from a rock in Waikiki. The rail ding from a crowded lineup. The pressure ding from a leash yank on a big day. When you fix them yourself, those stories become part of your craft.
Because here’s the thing: surfboards are meant to be used, not preserved like museum pieces. They get hit, they get scraped, they get pounded. And if you can patch them up right, you’ll never have to miss a swell because of a little damage. You’ll save money, too. A shop repair can run you forty bucks or more, and they might take a week. Your kit costs a bit upfront, but you can fix dozens of dings for the same price. Plus, there’s a stoked feeling of pride when you paddle out on a board you fixed yourself. You’re not just a wave rider anymore—you’re a part of the endless cycle of board life.
So next time you hear that sickening thud, don’t panic. Grab your kit, find a shady spot, and get to work. Sand smooth, resin clear, patch tight. Then when that first wave peels under your newly healed stick, you’ll know exactly why the old salts say a board with a good repair has more soul than one fresh out of the factory. Keep your kit stocked, keep your eyes open, and keep the stoke alive—one ding at a time.

